need diagram to have hids with drl

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108943
Printed Date: April 28, 2024 at 6:17 AM

Topic: need diagram to have hids with drl

Posted By: o2civic
Subject: need diagram to have hids with drl
Date Posted: November 15, 2008 at 6:13 PM

Guys,

Need your expertise to create a diagram for installing capacitors to enable HIDS to work flawlessly with Daylight Running Lights (DRL)

Alot of people SAY they have done this but no one provides the instructions clearly.. and everyone is different...

My issue is that my vehicle (Ford Edge) provides pulsated 9v - 12v power to power the DRLs. HIDS don't like that and a relay harness is not working..

Please provide me with what to do!

Replies:

Posted By: Velocity Motors
Date Posted: November 16, 2008 at 11:05 AM

HID's require 12v to trigger on. You will need a 12 v trigger source from the light harness to trigger a relay like this :

<"https://www.velocitymotorsport.com/images/install_notes/P2P.jpg">

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: o2civic
Date Posted: November 16, 2008 at 9:57 PM

Velocity,

Thanks! I have that same relay on the harness.. What trigger source do I need? I have one lead going to the battery.. and one going to a headlight power socket.

Here it is..
posted_image

-------------
o2civic

Posted By: Velocity Motors
Date Posted: November 17, 2008 at 11:49 AM

You need to meter the input (+) of the remote turn on from the light . If the voltage is too low during DRL option, then you will need to put in another relay to be triggered from the switch itself and then to the remote turn on from the light.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window