09 wrangler hid problem

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114223
Printed Date: May 28, 2024 at 6:40 PM

Topic: 09 wrangler hid problem

Posted By: bmfsiii
Subject: 09 wrangler hid problem
Date Posted: June 04, 2009 at 1:44 PM

Did a hid install in a 09 Wrangler. When you start the engine and turn the lights on, the lights come on for a few seconds, flicker, then turn off. The relay harness is installed. Tested the relay coming from the factory plug and noticed a voltage drop. It went from 12-13 volts (engine off, lights on ) to 8-9 volts (engine on, lights on). Any Ideas or solutions on how fix this, or make it work so the customer can have his hid's work properly ?

Thanks in advance for any and all replies.

Replies:

Posted By: Velocity Motors
Date Posted: June 04, 2009 at 7:33 PM

This is such a comon problem with Dodge, Jeep & Chrsyler vehicles. Most of these vehicles require a LCM for each light and each beam ( low and high )

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window