2006 mustang hid problem

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115152
Printed Date: May 14, 2025 at 9:05 AM

Topic: 2006 mustang hid problem

Posted By: cbr1000rr
Subject: 2006 mustang hid problem
Date Posted: July 18, 2009 at 12:20 AM

i installed a new set of HID's in my 2006 mustang. they work great when the cars not running. as soon as i start the car they flip on and off for a bit and then turn off completely. i checked the volts when the car was running and when it was off, and had the same voltage going to the lights, any clues on what to do?

Replies:

Posted By: KarTuneMan
Date Posted: July 18, 2009 at 9:00 AM

Describe to us please, "how" you have the ballasts wired! where did you get ground, where did you get 12v, what did you use as the trigger.

How is your relay wired... etc.

-------------

Posted By: cbr1000rr
Date Posted: July 18, 2009 at 2:19 PM

i used the 12v and ground from the stock head light wiring. the stock harness has 3 wires, a ground, a 12v for low beams, and a 12v for highs.

Print Page | Close Window