Print Page | Close Window

led’s on remote start

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124041
Printed Date: April 29, 2024 at 2:54 AM


Topic: led’s on remote start

Posted By: coolen
Subject: led’s on remote start
Date Posted: October 21, 2010 at 6:49 AM

I want to be able to turn some of my lights on and off on my truck via remote. I have a cm 3300 running my alarm/start system now. I have a few small - outputs left over. So, to do this, would I use a relay to reverse the polarity, and then another relay to power them? Then diode isolate the lights from the original switches? Does that sound right?

Thanks!!

I've been wanting to do this for a while now......




Replies:

Posted By: coolen
Date Posted: October 22, 2010 at 9:00 AM
Gonna check with other sites on this.............


Print Page | Close Window