Print Page | Close Window

08 ford fusion hid

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125395
Printed Date: May 06, 2025 at 1:45 PM


Topic: 08 ford fusion hid

Posted By: sean11901
Subject: 08 ford fusion hid
Date Posted: January 01, 2011 at 8:27 PM

I installed an hid in an 08 ford fusion with a relay harness at first not realizing that the headlight where computerized. So then I wired the ballasts directly to the headlight plugs. At first they worked great but then the left headlight (low beam only) stopped working. I got a new ballast and bulb still nothing. Is there a fuse for each headlamp low beam or is there just one for the both of them. If not what could it be??





Replies:

Posted By: i am an idiot
Date Posted: January 01, 2011 at 9:06 PM
Look in the owners manual or on the cover for the fusebox, one of those 2 locations should tell you what each fuse is for.



Posted By: sean11901
Date Posted: January 02, 2011 at 7:44 AM
yea but i was told that there is one fuse for both low beams because they are computerized. only the fusion that comes with factory hids has 1 fuse for each headlight low beam


Print Page | Close Window