94 dodge ram no reverse lights

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127348
Printed Date: May 13, 2025 at 11:13 PM

Topic: 94 dodge ram no reverse lights

Posted By: mikem40
Subject: 94 dodge ram no reverse lights
Date Posted: May 15, 2011 at 7:02 PM

My truck was a 5 speed Manual tranny which was converted to Auto. It has the original harness which has 2 wires for the revese lights

The lights were never wired. The Auto tranny has a NSS ( which is good) w/ 3 prongs for 3 wires. How can I make this work? to pass inspection

All other lights work.

Thanks in advance.

Replies:

Posted By: i am an idiot
Date Posted: May 15, 2011 at 8:50 PM

Do you have a digital multimeter? Check for continuity between all pins to each other pin. First in park, then neutral, and then in reverse. If park and neutral act the same but reverse behaves differently, get me that information and I can get it working for you.

Also check from each connection to chassis ground.

Posted By: mikem40
Date Posted: May 16, 2011 at 5:58 AM

In Park & N no continuity between 1 & 3 #2 has continuity to grd

In R 1 & 3 has continuity. so I think the switch is good

When I jumped the wires in reverse & key on I had one reverse light on. All bulbs are good

Print Page | Close Window