94 mustang hid

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127707
Printed Date: May 21, 2024 at 9:39 PM

Topic: 94 mustang hid

Posted By: stangman233
Subject: 94 mustang hid
Date Posted: June 22, 2011 at 6:36 PM

hi , i put bi-xenon hids in my stang, running off separate relays , they work only when the headlights are on, the drl don't work anymore.Went through the wiring diagram and found out the drl module can't be disabled , hardwired into the lighting system good. Now I'm stumped to how to get the drl working , do I require an extra relay or a capacitor or a resistor?Any suggestions accepted, also if anyone can do a diagram it would be much appreciated. Thanks.

Replies:

Posted By: stangman233
Date Posted: June 24, 2011 at 7:49 PM

oh well, time to see what iatn has in store, I know there are techs there willing to help.

Posted By: scrtcell
Date Posted: June 30, 2011 at 7:46 PM

the drl will not work the voltage to the ballast is too low from the light control module to run the hids

Print Page | Close Window