Print Page | Close Window

2011 tiguan oem alram

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128518
Printed Date: May 12, 2025 at 2:09 PM


Topic: 2011 tiguan oem alram

Posted By: clk0715
Subject: 2011 tiguan oem alram
Date Posted: September 13, 2011 at 9:12 PM

Anyone know where can I get a constant 12v output when the oem alram system on and 0 volt when alram system off? I want to install a led in the dashboard as a warning light. I'm driving a 2011 VW Tiguan.Thankyou in advance!




Replies:

Posted By: tonanzith
Date Posted: September 14, 2011 at 9:07 PM
Hmm.. You can either tie in to the factory dash security light or use 12v constant and then take the ground to a TRUE ignition wire. A true ignition wire rests at ground so using this the led would come on the instant you turn the car off.

-------------
Gary Sather



Posted By: clk0715
Date Posted: September 14, 2011 at 9:28 PM

Thanks tonanzith! I will tie in the factory alarm led, but the led is installed on the driver's door panel. It is very hard to located the wire without any information. May be I need to take off the door panel to find the wiring. Anyway I will try it. Thanks again!


Print Page | Close Window