Print Page | Close Window

retro hid light adjusters

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130500
Printed Date: July 06, 2025 at 11:18 AM


Topic: retro hid light adjusters

Posted By: maybach_man
Subject: retro hid light adjusters
Date Posted: February 03, 2012 at 2:35 PM

Hi All;

i am going to fit hid lights to my project car 1984 porsche 928. due to changes in the mot system there is a requirement for level adjusters if these are fitted. I have got some adjusting motors that have three pins from a seat (VAG) but i am clueless as to the cuircuitry required to make them function either by manual 3 position switch in cabin or by sensor on rear antirollbar, can anybody help with a diagram for an idiot!!

Geoff



Replies:

Posted By: handon11
Date Posted: November 01, 2012 at 10:33 AM

I wish I could help, because I'd like to do this on my retro as well, assuming what you're talking about is the rolling wheel like the new cars have that adjsut how high or low the cutoff is in front of you?

(Sorry this post didn't include any actually helpful info)


Print Page | Close Window