2009 altima 3.5 sedan
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130504
Printed Date: July 06, 2025 at 2:21 AM
Topic: 2009 altima 3.5 sedan
Posted By: deeryders
Subject: 2009 altima 3.5 sedan
Date Posted: February 03, 2012 at 8:09 PM
well I finally want to put HIDS and Fog on my car however I am confused with all these different charts that show colors differently based on chart. One chart would say 8000 is more blue then others an so forth. I want to get my lights as white as possible without any blue. I was thinking 5000 or 6000k. I have stock housing and wires would getting a 55w pose as a problem, also is there much difference? Lastly my car doesnt have fogs now I would assume i need to buy the housing, I seen some Halo ones on ebay but i am a bit skeptical on how they would look. Im trying to go white on white, what do you guys suggest and if you know where I can get the housing from other then ebay.
-------------
MECP Certified
Dont Ground Out!!!
Replies:
Posted By: deeryders
Date Posted: February 03, 2012 at 8:11 PM
one other thing i forgot to mention would i need the error eliminator or the hid dual in dual out harness. i was planning on getting the kit from ddmtuning.com they offer a life time warranty.
-------------
MECP Certified
Dont Ground Out!!!
Posted By: chev104275
Date Posted: February 04, 2012 at 4:55 PM
I have the 4300 ones in both my fogs and my headlights and they are white once warmed up
-------------
If i Can't Install it I Don't need it Joe
Posted By: tedmond
Date Posted: February 07, 2012 at 9:19 PM
4300k is like factory soft white
5k is similar to bright white
6+ is stepping into the blue hue.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|