ford f150 2011 headlights to ignition
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131413
Printed Date: May 13, 2025 at 7:51 PM
Topic: ford f150 2011 headlights to ignition
Posted By: ga16dnet
Subject: ford f150 2011 headlights to ignition
Date Posted: May 15, 2012 at 5:33 PM
Anybody now how to do this???? every time my mom use my truck i come back and the lights are on!! lol
thanks a lot
-------------
Tomas Smith Fernandez
Replies:
Posted By: dannylizotte
Date Posted: May 15, 2012 at 8:46 PM
Your Ford have a remote starter ?
-------------
Owner of 12 Volt Mobile over 15 year in car electronic
Posted By: ga16dnet
Date Posted: May 16, 2012 at 1:28 PM
i just install remote starter viper 5901
-------------
Tomas Smith Fernandez
Posted By: oldspark
Date Posted: July 16, 2012 at 2:04 AM
Either reconnect the +12V signal for the headlight switch and relays to an IGN +12V source (or maybe ACC), or...
Insert an SPST relay in series with the headlight beam relays (or before their selector switch) and have the relay energised by IGN +12V.
Or do what I do - a buzzer between the beam switch power (eg, taillights on) and to the door switch. The buzzer will sound if the taillights/beam-power is on and the door(s) is opened. Diode(s) may be needed if other circuitry is involved. (EG - I use a diode so that both doors trigger the dome light (if selected) but ONLY the driver's door buzzes when the parkers or lights are on.)
|