Fog Light Mounting

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138361
Printed Date: May 07, 2025 at 10:30 PM

Topic: Fog Light Mounting

Posted By: chassis
Subject: Fog Light Mounting
Date Posted: January 28, 2015 at 11:18 AM

Good day.I have been looking for pics on the net and couldn't find what I was looking for.I'm fitting aftermarket square spotlights to a toyota corrola 1998 model (sa).thing is ,there is no space in the bumper,the only way will be to cut in the bumper.I want to cut it and mount it from inside,but I don't know how it will be positioned from behind as I need it level with the bumber.these are bumper mount,any pictures or links will be appreciated. posted_image

-------------
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.

Replies:

Posted By: oldspark
Date Posted: January 28, 2015 at 3:21 PM

Hopefully those vehicles have bumperbars of thinner material than older bumper bars!
Alas I tend to work with older chromed bars and you'd do anything to avoid having to cut and mount into them. You can't even weld without having to re-chrome the bar...

I cut driving lights into the grill of my vehicles. If that's too high for fogs I'd mount the fogs under the bar, but evrything under my bar gets hammered upwards - a result of my dirt road driving style.

Posted By: chassis
Date Posted: January 28, 2015 at 11:59 PM

Thank you old spark.

-------------
Do it once,do it right - This means no short cuts. You never get paid twice for having to do the job twice because it wasn't done right the first time.