Print Page | Close Window

Switchback using stock 2013 Mustang Headlights

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140413
Printed Date: May 06, 2024 at 12:22 PM


Topic: Switchback using stock 2013 Mustang Headlights

Posted By: vartech
Subject: Switchback using stock 2013 Mustang Headlights
Date Posted: December 27, 2015 at 4:23 PM

I have a set of 2013 mustang headlights. I am trying to use the drl and have the turn signal turn of the drl when active. I am using a morimoto switchback driver but I believe that driver cuts the ground not power. The issue is the headlight assembly uses a common ground for drl and highbeam and when the turn signal is on the drl turns off and the high beam does not work. I need help coming up with a solution.



Replies:

Posted By: vartech
Date Posted: January 15, 2016 at 8:34 PM
found solution use diodedynamics ds1


Print Page | Close Window