LED panels
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141192
Printed Date: April 27, 2024 at 9:53 AM
Topic: LED panels
Posted By: webpager
Subject: LED panels
Date Posted: April 22, 2016 at 12:57 AM
Hey folks,
I have almost no experience with LEDs, so I want to throw this out to be sure I'm thinking correctly.
I may be building a project with a large number of LED panels. They are pre-built, 12V pieces. (24 SMD 5630s each). You can see what I'm going to use here: https://www./itm/10X-Red-Car-24-SMD-5630-LED-panel-Light-Dome-Bulb-T10-Festoon-Spring-12V-/310862502050?hash=item4860d958a2:g:ohwAAOxyDEVScSTQ
Since these are already mounted and wired to use 12V, I can simply wire the boards in parallel. I'll be using a PWM dimmer, and groups of lights will be on separate circuits.
Appreciate your time and expertise.
MCSteven
Replies:
Posted By: webpager
Date Posted: April 22, 2016 at 12:59 AM
Sorry - I didn't realize that we can't post eBay links. If you search that site for "Red Car 24 SMD 5630 LED panel" it should give you the correct results.
|