Print Page | Close Window

3 Sets of Switch Back Halos to Turn Signal, 2007 Tundra

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144679
Printed Date: May 01, 2025 at 6:52 PM


Topic: 3 Sets of Switch Back Halos to Turn Signal, 2007 Tundra

Posted By: mcdonaldcm87547
Subject: 3 Sets of Switch Back Halos to Turn Signal, 2007 Tundra
Date Posted: August 20, 2018 at 10:35 AM

I have a pair of headlights with two sets of switchback halos. I also have a pair of morimoto fog lights with 1 switchback halo in each. I would like to hook up all the switchbacks to my turn signal by tapping into my stock harness(if this will work). I have acquired a "tapable" harness that will go from my stock headlight connector to the hid kit I have.

My question is would it the best if I soldered 3 into one into the tap harness I have or is there another way to achieve the results.   

I spent the better part of the morning un pinningand refining my stock connectors due to t-taps destroying my factory harness.



Replies:

Posted By: mcdonaldcm87547
Date Posted: August 20, 2018 at 10:36 AM
It's a 2007 toyota tundra if that matters


Print Page | Close Window