On/Off Rocker Switch With Seperate Momentary Switch
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144867
Printed Date: April 20, 2024 at 3:26 AM
Topic: On/Off Rocker Switch With Seperate Momentary Switch
Posted By: mpsticks
Subject: On/Off Rocker Switch With Seperate Momentary Switch
Date Posted: October 17, 2018 at 7:02 AM
So I'm working with the led caution strobes that you can buy at AutoZone. Most of them come with wireless remotes now days but I purchased some a while back that were hard-wired and were controlled using rocker switches. The switches were a side by side set up with one switch that turned it on/off and the other being a momentary switch that you pushed to cycle through the flash patterns. This little dual rocker switch assembly was mounted in the end of a 12 volt plug thing that plugged into your cigarette lighter. Long story short, I wanted to mount the rocker switches into my dash and took it all apart but I didn't pay any attention to the wiring setup. Now I cant figure out how to wire the dang thing(s) back up and make them work. Is anyone familiar with or does anyone know how to or have a wiring diagram for this dual rocker switch setup? I know it's probably super simple but when it comes to this kind of thing I'm not the smartest. Thanks in advance.
|