Print Page | Close Window

Add Flashing LED to Alarm

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145762
Printed Date: May 01, 2025 at 12:52 PM


Topic: Add Flashing LED to Alarm

Posted By: wagzla
Subject: Add Flashing LED to Alarm
Date Posted: November 07, 2019 at 4:28 PM

My car alarm did not come with a flashing led to warn potential thieves that I have an alarm installed and I see there are ways to install one that flashes when the key is out of the ignition but then it will flash whenever the key is out even if the alarm is not activated. Is there a way to wire up the flashing led to only activate when the alarm is activated by the remote by splicing into the lock trigger wire or similar?
Alarm system is a non vehicle specific aftermarket unit installed in a 2001 Nissan
Thanks in advance for any assistance

-------------
Wagzla



Replies:

Posted By: i am an idiot
Date Posted: November 07, 2019 at 8:07 PM
2001 nissan what?



Posted By: i am an idiot
Date Posted: November 07, 2019 at 8:11 PM
Flashing LED positive wire to Constant power. Ground the LED to the positive ignition wire.


Print Page | Close Window