Positive Wire Turn Off for LED
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145907
Printed Date: May 08, 2024 at 12:01 AM
Topic: Positive Wire Turn Off for LED
Posted By: daytonboi
Subject: Positive Wire Turn Off for LED
Date Posted: January 03, 2020 at 11:56 PM
I have some Demon Eye leds that i want to use. But upon inspection they do not have the positive wire cut off that i'm use to. I know I can do it with a relay but I like the much smaller inline solution that the positive wire cut off affords. Does anyone know how to wire this up or anyplace that sells them?
-------------
2013 Chevy Impala LTZ
Replies:
Posted By: i am an idiot
Date Posted: January 04, 2020 at 5:42 AM
How many wires does this thing have? What do you mean by positive turn off?
Posted By: daytonboi
Date Posted: January 04, 2020 at 10:08 AM
the demon eyes i have are profiles they only have a positive and negative connection. The set currently on the car and going to another vehicle have three wires two positives and a negative. There is a ground, a positive (R(on)), and a positive (W(off)). In my case when the DRL or parking light circuit is active the (R) leg of the circuit is active. When the low beams are turned on (W) is energized turning the LED off.
-------------
2013 Chevy Impala LTZ
|