V.3 Fusion Color Change Halo

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146841
Printed Date: May 01, 2025 at 9:00 AM

Topic: V.3 Fusion Color Change Halo

Posted By: ww421jr
Subject: V.3 Fusion Color Change Halo
Date Posted: May 07, 2021 at 10:03 PM

I currently have my Halo's to come on with dome lights, how can i also connect to a constant power to turn on using a toggle switch. When I tried it, it would also turn on the interior lights.

Replies:

Posted By: i am an idiot
Date Posted: May 08, 2021 at 7:21 PM

https://www.the12volt.com/diodes/diodes.asp

Posted By: ww421jr
Date Posted: May 10, 2021 at 6:23 PM

More clarification please.

Posted By: i am an idiot
Date Posted: May 10, 2021 at 6:33 PM

I need a diagram of what you have now. What vehicle?

Posted By: ww421jr
Date Posted: May 10, 2021 at 8:43 PM

2007 Dodge Charger R/T

Posted By: ww421jr
Date Posted: May 10, 2021 at 8:54 PM

This is what I want to be able to do, does it make sense and can it be achieved using relays. sorry for the poor drawing.

posted_image

Posted By: i am an idiot
Date Posted: May 10, 2021 at 9:51 PM

Middle pole to Halos.
Constant to terminal on one end.
Power from dome to the other terminal.

No diode needed.

If you use an On-Off-On type of switch you will be able to have the halos to come on with the domelight, or with the switch, and also turn them off.

Posted By: i am an idiot
Date Posted: May 10, 2021 at 10:00 PM

Your bottom picture is missing one line to make it work. From middle terminal of switch to the PW terminal of the halo controller.

You drew the 2 components in the perfect place. Just draw a line from middle terminal of the switch straight down to pw on control box.

Posted By: ww421jr
Date Posted: May 10, 2021 at 10:30 PM

Awesome, thanks for the help

Print Page | Close Window