Print Page | Close Window

Add Flash for Already On Running Light

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146885
Printed Date: May 01, 2025 at 8:45 AM


Topic: Add Flash for Already On Running Light

Posted By: erikhinzmn
Subject: Add Flash for Already On Running Light
Date Posted: June 15, 2021 at 6:58 AM

Hello,

I have a 2021 Polaris Rzr Turbo that has the front fang lights on it, that are setup to be constant amber running lights controlled by the ignition.

I have a turn signal kit that has 12v “+“ and “-“ wires coming out of it for left and right.

Is there a simple way to make my running lights flash using the turn signal ‘signal’ wire?

I’m sure it’s been answered before, I was just unable to find it.

Thank you!!



Replies:

Posted By: i am an idiot
Date Posted: June 16, 2021 at 9:53 PM
On the output of the blinker kit, which wire is pulsed? The positive or the negative? Using a relay per side you will be able to make the fang light on that side go out when the blinker light is out and illuminate when the turn signal is on.


Print Page | Close Window