Print Page | Close Window

Adding 4-Way Hazard Flashers To Classic Car

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148206
Printed Date: May 02, 2025 at 12:30 PM


Topic: Adding 4-Way Hazard Flashers To Classic Car

Posted By: rossl
Subject: Adding 4-Way Hazard Flashers To Classic Car
Date Posted: November 13, 2024 at 9:48 AM

I am trying to find a suitable switch to add 4 way hazards to my 55 Ford (converted to 12 volts).   Front and rear lights are separated on separate legs. The rear brake lights are also used for rear turn signals. Front turn lights have separate dash indicators in parallel



Replies:

Posted By: lee.lopez
Date Posted: November 16, 2024 at 9:09 AM
You can use this as a starting point from your hazard switch:

https://www.the12volt.com/relays/relaydiagram23.html

You'll need to connect a flasher to the output and can use high current diodes to isolate the lights from each other.


Print Page | Close Window