LED’s
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20737
Printed Date: November 04, 2025 at 8:02 AM
Topic: LED’s
Posted By: AccentShow
Subject: LED’s
Date Posted: October 29, 2003 at 8:39 PM
Hey everyone, I'm thinking of doing something different but I need help figureing out how to do it. I know you all have seen the LED Scanners, well what would it do if I were to seperate the led's and lengthen the wire, Not much just alittle to place them somewhere else? Any and all help is appreciated.
Replies:
Posted By: auex
Date Posted: October 29, 2003 at 10:12 PM
Sure you can do this. Just unsolder the position where the led is in the board and solder some wires back to the board where you took the led out of. Then just run the wires and hook the led back up.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: xetmes
Date Posted: October 30, 2003 at 4:25 AM
yea you wont really have any problems unless you make the wires like a mile long hah
|