neon pedals transformer

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24351
Printed Date: May 14, 2025 at 6:11 PM

Topic: neon pedals transformer

Posted By: jrod5000
Subject: neon pedals transformer
Date Posted: January 10, 2004 at 10:21 PM

hey gang, i've got a set of neon pedals installed on my car, but the transformer box seems to have blown. i'm wondering if anyone has ever built their own converter? obviously it has to take 12v as input and step up to something higher, but how much higher, i don't know. does anyone have a clue approximately what output voltage would be sufficient and at what current? circuit diagram? i'd love to build my own.

by the way, how many of you have had problems with these little black boxes?

Replies:

Posted By: plywood
Date Posted: January 20, 2004 at 3:04 PM

I'm not sure on the out put power, but from what i've seen and heard, those little black boxes tend to go out quite often.

-------------
Matt

Always remember to test wires with a Digital Multimeter!

Posted By: jrod5000
Date Posted: January 20, 2004 at 4:53 PM

>> I'm not sure on the out put power, but from what i've seen and heard, those little black boxes tend to go out quite often.

yeah they do! i wish i knew someone who had a working one so i could see what it puts out. :-(

Posted By: cbowlin99
Date Posted: February 26, 2004 at 8:39 PM

the only thing i can think of to do is find a variable voltage power supply, and hook it up to the pedals. crank up the voltage until they glow (like they are supposed to not fixing to burst into flames HEHE) then measure the voltage.

Craig B.

-------------
Craig B.

Print Page | Close Window