neon daytime running lights

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26332
Printed Date: July 04, 2025 at 9:34 PM

Topic: neon daytime running lights

Posted By: peter884
Subject: neon daytime running lights
Date Posted: February 12, 2004 at 9:57 AM

im trying to disconect my factory daytime running lights on a 2000 neon and theres no fuse for just the running lights any suggestions.

thanks

-------------
peter

Replies:

Posted By: S.I.Autosports
Date Posted: February 13, 2004 at 4:57 AM

There should be a resistor under the hood some where. You might unplug it and see if that does it. Im not sure where it is located on that car. Can i ask why you want them disconected?

Posted By: peter884
Date Posted: February 13, 2004 at 7:00 AM

i've got a better set so i only want the factory ones for blinkers and markers i'll try to find the resistor thanks

-------------
peter

Posted By: peter884
Date Posted: February 16, 2004 at 12:16 PM

I found one resister that shut them off but it also runs my fuel pump i dont know if there is a way around that or not without rewiring the fuel pump i would rather not go that way just for driving lights if you have any other suggestions they would be more than welcome thanks

-------------
peter

Posted By: Neo2Neo
Date Posted: March 03, 2004 at 10:33 PM

You could try and take out the bulbs! (i guess there is 2 seperate bulbs for blinking ang running, no?)

Posted By: peter884
Date Posted: March 29, 2004 at 11:16 AM

no because the power for both turn signal and running lights are on the same wire and i dont want to run a new wire when theres already one there

-------------
peter

Posted By: popeye004
Date Posted: March 30, 2004 at 12:11 AM

why don't you pull your hand brake one knoch doesn't that work?

Print Page | Close Window