Print Page | Close Window

LED help

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35732
Printed Date: May 15, 2024 at 8:38 AM


Topic: LED help

Posted By: viper04649
Subject: LED help
Date Posted: July 17, 2004 at 12:10 AM

i am planning on making a grill  for my sub out of florescent acrylic and using leds to light it up.

will a uv led light up the acrylic better?

i know i want to run a wire from the ignition to a switch to a relay, from the relay, i will wire the leds (i am thinking 4 at the moment).  i think that is what i need to do, don't know how to do this.

  • where to get relay, and switch?
  • what gage wires?
  • should i fuse, if so how many amps?
  • are resistor or anything else used.

also, on the box, i want to be able to plug unplug the grill(i mean the leds from the power)

-travis




Replies:

Posted By: viper04649
Date Posted: July 17, 2004 at 12:11 AM
also, is there anything that i should read that might help with any of this?


Print Page | Close Window