Print Page | Close Window

signal light re-wire

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36711
Printed Date: May 03, 2025 at 1:18 AM


Topic: signal light re-wire

Posted By: MAXIMUS96
Subject: signal light re-wire
Date Posted: August 03, 2004 at 4:42 PM

i want to wire my signal light such that they come on with the parking light AND blink when i turn on my signals.  i remember reading somewhere that i can wire the 12v+ from the signal bulb  to the 12v+ of the parking light.  then wire the 12v+ from the signal to the 12v- of the signal bulb.  when the signal is flashing, both will be 12+ and the light will turn off and thus blink.  i never tried it because i feel something is not right about the 12v+ signal to the 12v- on the bulb. please help.  thanks



Replies:

Posted By: styper
Date Posted: August 04, 2004 at 3:41 AM
maybe try using some jumper wires to see if this works, the worst you can do burn the bulbs.

-------------
S type R.


Print Page | Close Window