Neon lights in ’04 Mazda 3

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46766
Printed Date: July 05, 2025 at 11:28 AM

Topic: Neon lights in ’04 Mazda 3

Posted By: titan36
Subject: Neon lights in ’04 Mazda 3
Date Posted: January 03, 2005 at 12:35 PM

How do I wire 12v interior neon accent lights to my fog lights for under-dash installation on 2004 Mazda 3??

Any assistance would be greatly appreciated!!!!!!!

:oops:

Replies:

Posted By: forbidden
Date Posted: January 03, 2005 at 2:22 PM

Get yourself a meter first. Take the switch out and meter the switch to see what kind of circuit it is, a positive or negative trigger. This needs to be done before any type of wiring can be done.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: titan36
Date Posted: January 03, 2005 at 3:17 PM

Groovy - thanks Rob!!

i do have a meter at my house, and will test once i'm home.

Once + or - is established, what's step 2?

Posted By: titan36
Date Posted: January 04, 2005 at 11:39 AM

Okay, so which wire is the fog lights???

i looked at a bundle of wires under the dash by the brake and see many different colors

-------------
Kaira
- bad girls like fast cars posted_image

Posted By: forbidden
Date Posted: January 04, 2005 at 12:20 PM

You must take out the switch, don't just try hooking a wire up to another wire. If this is beyond your capabilities, stop right now and have it done for you. It is far more expensive to repair a fried circuit than it is to have the lights properly installed.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window