Print Page | Close Window

Brake Lights Don’’t Work

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48097
Printed Date: May 07, 2024 at 11:29 PM


Topic: Brake Lights Don’’t Work

Posted By: layinframe_95
Subject: Brake Lights Don’’t Work
Date Posted: January 19, 2005 at 11:37 AM

So just this last weekend a friend of mine rear-ended me because apparently my brake lights don't work.  My running lights work fine, both turn signals work fine, as well as my hazards.....  I checked all the fuses in the dash as well as in the engine compartment.  Any advice or ideas would be greatly appreciated :)      oh, I drive a 2002 Chevy Blazer LS if that makes any difference.... 



Replies:

Posted By: Hymer
Date Posted: January 19, 2005 at 8:09 PM
From one Mn'r to the other... check to see if you get 12v at at a white wire in the steering column (or if ya can get to it the white wire at the brake switch just above the pedal) when you depress the brake pedal... If you have that then start at the rear and work forward look for 12v when the brake is pressed (use a brick or something to keep the pedal down) and back trace the wires... with both of them out I would have to say it's probably the brake switch...

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair




Posted By: layinframe_95
Date Posted: January 19, 2005 at 11:35 PM
I will give that a try and let you know what I come up with.  Thanks for the help :)




Posted By: layinframe_95
Date Posted: January 23, 2005 at 8:12 PM

So i checked the checked the brake switch and found that the two white brake light leads had some how gotten torn out of the harness that plugs into the brake switch.  So i got those back in to the harness and my brakes work fine now. thanks for your help Hymer. 






Print Page | Close Window