third brake light

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5399
Printed Date: August 13, 2025 at 2:20 PM

Topic: third brake light

Posted By: dj styles
Subject: third brake light
Date Posted: November 12, 2002 at 9:28 PM

how can i wire in a third brake light into a 88 silverado and not have it flash with the signal lights, will i just have to buy the module to keep it from flashing. is there any other way of doing this.

-------------
gabriel correa

Replies:

Posted By: PLAYER69
Date Posted: November 12, 2002 at 9:36 PM

you need to run a wire right to the brake switch. The wire will be white wire. Check with a DMM it will rest at ground and go +12v when you push the brakes. It could also possibly be yellow. Most likely it is white.

Posted By: dj styles
Date Posted: November 12, 2002 at 10:28 PM

thanks player69, will try it tomorrow.

-------------
gabriel correa

Print Page | Close Window