Pulsing Turn Signals

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5695
Printed Date: August 14, 2025 at 11:15 PM

Topic: Pulsing Turn Signals

Posted By: muxx
Subject: Pulsing Turn Signals
Date Posted: November 20, 2002 at 2:35 PM

Could this easily be done with some relays and capacitors.

Pulsing: https://hypesite.fateback.com/rsx2.htm

Normal: https://hypesite.fateback.com/rsx1.htm

Replies:

Posted By: NyxBass
Date Posted: November 20, 2002 at 3:42 PM

I would like ot think so. I assume a resistor, used to charge the cap up, makes it slowly build in intensity, and then as the flasher switches, the cap slowly discharges. I'm not sure of the kind of values you'd need, and don't have my formula resources with me to figure it out right now, but maybe a little later...Probably someone else could help too.

-------------
/NyxBass

Print Page | Close Window