Print Page | Close Window

glo pedals

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57041
Printed Date: May 14, 2025 at 8:52 AM


Topic: glo pedals

Posted By: lilhtumper20
Subject: glo pedals
Date Posted: June 04, 2005 at 6:42 PM

I just bought a pair of Neon Pedals for my 2002 Mountaineer. I need to know where to put the wire? What is the best 12 v source?



Replies:

Posted By: Scuba_04
Date Posted: June 12, 2005 at 12:42 AM
Tap into a fuse that has 12V when key is on. Ground to frame. Make sure you don't tap into ECU or SRS or anything important you don't want the fuse to blow on, Get my point.

-------------
Steve
Music Mart
Installer



Posted By: Theshadow27
Date Posted: June 15, 2005 at 4:20 PM
if you are under the kick pannel already, the ignition harnass should have a +12 and ground.

-------------


Print Page | Close Window