Print Page | Close Window

Trunk neon go on with system

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59447
Printed Date: May 04, 2024 at 2:13 PM


Topic: Trunk neon go on with system

Posted By: jettadude
Subject: Trunk neon go on with system
Date Posted: July 14, 2005 at 8:13 PM

ok how can i get neons to turn on with the amp? i had them wired to the remote on the amp but that was causeing it cut off. any other ideas?



Replies:

Posted By: cs015271
Date Posted: July 14, 2005 at 11:52 PM
You will have to use a relay to power the neons. Just use the remote turn on lead as the activation for the relay.



Posted By: auex
Date Posted: July 14, 2005 at 11:57 PM
posted_image

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window