Print Page | Close Window

Switchs

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59656
Printed Date: May 19, 2025 at 4:26 AM


Topic: Switchs

Posted By: lutz07
Subject: Switchs
Date Posted: July 18, 2005 at 6:28 PM

alright i got a question...i got 2 10inch neon sticks...i was wondering if there is an easy way to install a toggle switch on my dash and can turn the lights on and off...if there is how would i got about doing so?



Replies:

Posted By: nowlater123
Date Posted: July 18, 2005 at 6:46 PM

Very simple.

All you need is a 12volt relay, a switch, and some wire. Find out where you want to install the switch, and the relay. Run the wires through to where the switch and relay are going to be.  Attach power wire to battery, to the switch, and to the relay. Ground the relay and run the power wire that comes off the relay to the neons. Then just ground the neons and you're finished. Use the diagram on the relay box for all the conections.



-------------
Kenwood all the Way!


Print Page | Close Window