Switch Problem
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60314
Printed Date: May 11, 2025 at 9:35 PM
Topic: Switch Problem
Posted By: devile
Subject: Switch Problem
Date Posted: July 28, 2005 at 10:06 PM
Ok i got a couple lights i'm putting on the roof of my jeep, but the instrustions for the switches were weird so i'm trying to figure it out... Please help..
It's a rocker switch with four prongs on the back, the first time i wired it a blew the stupid fuse... Please help, I know there should be a power in (from batter), power out (to lights), and a ground for the switch so the light lights up. Please help which goes where????
Replies:
Posted By: devile
Date Posted: July 28, 2005 at 10:10 PM
pic  sorry there's the pic
Posted By: customcarchris
Date Posted: July 28, 2005 at 11:46 PM
Since I don't know from the switch, use a DMM to test continuity between two of the terminals when you switch and then you know which ones are switched. I thought usually ground was on bottom. Four terminals? Maybe Power In, Power Out, Power for Light, and Ground?
Posted By: customcarchris
Date Posted: July 28, 2005 at 11:46 PM
Since I don't know from the switch, use a DMM to test continuity between two of the terminals when you switch and then you know which ones are switched. I thought usually ground was on bottom. Four terminals? Maybe Power In, Power Out, Power for Light, and Ground?
|