Print Page | Close Window

multiple lights, wiring

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62004
Printed Date: May 05, 2025 at 12:31 PM


Topic: multiple lights, wiring

Posted By: reazon
Subject: multiple lights, wiring
Date Posted: August 25, 2005 at 12:17 AM

First of all, I'm a newbie at wiring and such, so please excuse any stupid questions/actions. I hooked up two neon tubes, 2 LED tubes, 6 single LEDs, and 3 wire lights through the firewall to my battery with a fuse on the positive and a switch on the negative. However, only the single LED's lit up... So I split the wires into four groups, with 4 wires running to the postive end of the battery; however it seems like I will need to run 4 wires to the negative end of the battery too?!! Is there anyway to prevent this because 4 switches would just look silly =P

PLEASE HELP ANY WAY POSSIBLE... diagrams would be nice ;)

-------------
Working on the car :)



Replies:

Posted By: reazon
Date Posted: August 25, 2005 at 12:19 AM
Oh yeah, I forgot to mention that I did wire them in parallel circuitry posted_image

-------------
Working on the car :)


Print Page | Close Window