Print Page | Close Window

Foglights on with High Beam

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63066
Printed Date: July 02, 2025 at 6:29 AM


Topic: Foglights on with High Beam

Posted By: hanger747
Subject: Foglights on with High Beam
Date Posted: September 22, 2005 at 9:40 AM

Guys & Gals,

I appreciate that my request is probably a little unusual, given that US law prohibits the use of foglights with high beam.

However, being outside the USA the same rules do not apply to me.

I would like to be able to have my foglights activate when I flash my high beam, but also have a switch installed so that I can disable the foglights flashing when high beam is used.

The foglights would also need to work from their existing switch when the above function is disabled.

Can anyone post a diagram of the best way to connect this all up?

Thanks in advance.



-------------
Regards,


Hanger747
"Poor Planning On Your Part Does Not Constitute An Emergency on Mine!"



Replies:

Posted By: montecristo
Date Posted: September 29, 2005 at 1:46 PM

you have to use relays to make the whole thing  works nice....but can be done





Posted By: montecristo
Date Posted: September 29, 2005 at 1:48 PM
also ...you want to use your fog light and the low beam  on?




Posted By: hanger747
Date Posted: October 02, 2005 at 9:30 AM

Guys,

Many thanks for your replies.

Can anyone put a circuit diagram together and post it here?



-------------
Regards,


Hanger747
"Poor Planning On Your Part Does Not Constitute An Emergency on Mine!"





Print Page | Close Window