sho-me lightbar

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64414
Printed Date: May 13, 2025 at 1:27 AM

Topic: sho-me lightbar

Posted By: suzuki
Subject: sho-me lightbar
Date Posted: October 15, 2005 at 2:57 AM

I just received a SHO-ME LED slim light kit model no. 11.8600p for my 2004 Suzuki Grand Vitara. A wiring diagram came with it but it dosen't specify where to tap into the 12volt pwr source.

I'm wondering if I should run a wire from the battery terminal and through the firewall or from the fuse box.

If from the fuse box is correct, which terminal can I use and how would I run it without ruining anything?:errr:

-------------
Suzuki

Replies:

Posted By: fingaz22
Date Posted: October 15, 2005 at 12:23 PM

depends on the amparage it is rated at. if it is higher than 25-30amps i would go to the battery with an inline fuse at most 18" away from battery. fuse it for its amp rating

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Print Page | Close Window