Wiring Angel Eyes to Chevy Blazer
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66892
Printed Date: May 13, 2025 at 9:01 AM
Topic: Wiring Angel Eyes to Chevy Blazer
Posted By: greeny12
Subject: Wiring Angel Eyes to Chevy Blazer
Date Posted: November 23, 2005 at 1:46 PM
I have a 98 chevy blazer and the Haynes Manual here and I am trying to wire these new headlights in to my system. I have a Red and Black on the angel eyes and I want them to come on with my parking lights but not flash at all with my signal lights. I (think) based on the diagram that the positive should come off the brown wire in my harness but I am not to sure where in the harness I should hook up the positive to the angel eyes and where I should put the black from the angel eyes. Kinda new to this could someone help me? Thanks
-------------
Greeny12
Replies:
Posted By: cowboy21
Date Posted: November 25, 2005 at 3:01 AM
do ur parking flash or just ur indicators? if ur parking lights don't flash u can hook straight into the positve of them with the red wire and the black can just ground ( attach to the chassis ), if the do flash the maybe you can hook them up with the lights in your cluster, u'll just have to find the positivbe for them, good luck
-------------
modest yet effective... ECLIPSE 12", Venom 8"x2, Focal 5 1/2" comp.,Response amps x2 (580WRMS total @ 4Ohms), Pioneer TFT + DVD, good for 148.7dB
|