Print Page | Close Window

existing sprayers

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69215
Printed Date: May 16, 2025 at 1:56 AM


Topic: existing sprayers

Posted By: b-rice
Subject: existing sprayers
Date Posted: December 26, 2005 at 2:51 PM

i have a 2001 hundai elantra and i am not having any problem with the wiring, but i can't figure out how to get the existing sprayers off the hood without damaging them. can anyone help with this?



Replies:

Posted By: b-rice
Date Posted: December 26, 2005 at 2:56 PM
i have a 2001 hundai elantra and i am not having any problem with wiring my new LED windshield sprayers, but i can't figure out how to get the existing sprayers off the hood without damaging them. can anyone help with this?



Posted By: b-rice
Date Posted: December 26, 2005 at 3:04 PM
while im at it, i also need help with removal of the panel covering my stero and air controls so i can replace my stock stero with a newer one. instead of there being a small panel encasing only the electronics, the panel covers the electronics as well as my spedometer (etc.) all the way to the door. posted_image



Posted By: menace2sobriety
Date Posted: December 31, 2005 at 7:11 AM

as the washer sprayer goes there should be a nut on the under side of the hood that you can loosen.

now your panel. so what you are saying is it,s all one peice? that blows! im not Familiar with hundai's. so all I can say is study the dash panel take out all the visible screws if any and take your time.




Posted By: firelizard
Date Posted: January 03, 2006 at 12:27 PM

I recommend getting a Chilton's manual for your car because it will not only show you how to take apart your dash, it will come in handy other times as well. They're only about 20 bucks.

Crutchfield has radio installation kits for most newer model cars so you might be able to find some options there. Or you could cut out the electronics and 'glass in a custom DIN slot =)


Print Page | Close Window