how to fit neons?

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70378
Printed Date: May 10, 2025 at 1:45 PM

Topic: how to fit neons?

Posted By: muir_gordon41
Subject: how to fit neons?
Date Posted: January 09, 2006 at 6:19 AM

hello there, i just got some neons for my first car and i havnt a clue how to fit them! I was going to put two in the boot and two in the front, just wondering if any1 could sujest which wires i should connect them to? where are typical 12v connections and what would be suitable for an earth?

Replies:

Posted By: firelizard
Date Posted: January 09, 2006 at 8:12 PM

What kind of connectors came with them? If they're bare wires, tap the rears into the boot light I guess, and the fronts to either the cig plug wiring with a switch

you can use any bare chassis metal for an earth, I used an air conditioner bracket behind the dash for my headunit.

Posted By: ken8801
Date Posted: January 31, 2006 at 1:29 PM

Neons that I have been looking at have an inverter? If I were to wire it off the boot interior light (so when the boot is opened light comes on) how would I do so? I Ideally want neons that dont have inverters or have them built in so it is all neat?

Print Page | Close Window