Print Page | Close Window

Hooking up Alarm LED Headlight Flashers

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70727
Printed Date: May 04, 2024 at 1:41 AM


Topic: Hooking up Alarm LED Headlight Flashers

Posted By: roadrunner_19_v
Subject: Hooking up Alarm LED Headlight Flashers
Date Posted: January 14, 2006 at 12:06 AM

I know how to hook these up to a car with an aftermarket alarm. But I am trying to put them on a car that has a factory alarm. I need to find a wire that produces a constant negative output when the OEM alarm is armed. Does anyone know where I can find this kind of negative wire on a 2002 Cadillac Escalade?



Replies:

Posted By: KPierson
Date Posted: January 14, 2006 at 3:31 AM

There would be several ways.  Tap the signal from the OEM alarm, or just flash them whenever the car is off.  LEDs are a detterant, so having them flash even if the alarm isn't armed isn't a bad idea.



-------------
Kevin Pierson



Posted By: total_overkill
Date Posted: January 17, 2006 at 3:42 PM

if you do do it when ignition off this post will help

https://www.the12volt.com/installbay/forum_posts.asp?tid=66387&PN=1



-------------
40 grit has saved my life sometimes =[


Print Page | Close Window