Switches with LED’s

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71074
Printed Date: May 08, 2024 at 1:09 PM

Topic: Switches with LED’s

Posted By: total_overkill
Subject: Switches with LED’s
Date Posted: January 18, 2006 at 9:09 PM

I did this months ago. I added bezzels and LEDs to my Hvac area plastic, to represent when a switch is on. I have 5 switches and 5 bezzels, 5 Leds placed there. When switch is in on position the coresponding LED will light up ( tied in with that power source) signifying that the switch is active. I merely drilled proper size holes, added the nice chrome bezzels, make sure theres resistors to equal the current. and voila. Light up switches LED style.

-------------
40 grit has saved my life sometimes =[

Replies:

Posted By: ff-mike
Date Posted: January 19, 2006 at 8:33 AM

I did something similiar to this many years ago, but took it a step further- I used dpst switches and when 'off' the output turned on the green portion of a bicolor led. When on it turned on the red portion

Posted By: ingolf
Date Posted: January 19, 2006 at 6:10 PM

any pictures?

Posted By: total_overkill
Date Posted: January 19, 2006 at 7:07 PM

Actually got the dash off so I could post some 2morrow I borrow my buddies camera. (had one but tradeed lap top and sureshot for a motorbike) posted_image

-------------
40 grit has saved my life sometimes =[

Posted By: total_overkill
Date Posted: January 19, 2006 at 8:58 PM

Found some old pics.

posted_image

-------------
40 grit has saved my life sometimes =[