Fuse size for neons / cold cathode

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72475
Printed Date: May 16, 2025 at 2:19 AM

Topic: Fuse size for neons / cold cathode

Posted By: coppellstereo
Subject: Fuse size for neons / cold cathode
Date Posted: February 09, 2006 at 12:16 AM

What fuse should be used for a typical neon setup? Each set of lights is in a different location and will have their own fuse.

Also, what size fuse do you think I should use for a dual window roll up module?

-------------

Replies:

Posted By: infinkc
Date Posted: February 09, 2006 at 10:02 PM

i would go with a 7.5 for the neons and for the windows look at what the factory uses for the windows and stick with that value, if they fuses blow go to the next size up, better safe than sorry

-------------
There are 10 types of people in the world, ones that understand binary and ones that dont.

Posted By: coppellstereo
Date Posted: February 10, 2006 at 1:02 PM

Thanks for the advice.

-------------

Print Page | Close Window