Print Page | Close Window

Wiring Control Box

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72628
Printed Date: April 29, 2024 at 10:53 AM


Topic: Wiring Control Box

Posted By: beatynator1
Subject: Wiring Control Box
Date Posted: February 11, 2006 at 4:18 PM

 I have a LED undercar kit where all the wires from the leds run to the control box. The control box then has a positive wire and a negative wire that your suposed to run to the battery. The power is 12V and i would like to somehow incorperate a switch inbetween the control box and the battery. Im new at this and the switch I have has 3 prongs (positive, ground and acc) (the toggle switch has a led in it) idk how to wire this up so if you could please help me.



Replies:

Posted By: psychographic
Date Posted: February 11, 2006 at 6:49 PM

Positive=Battery +

Negative=Ground

ACC=Control Box +




Posted By: beatynator1
Date Posted: February 12, 2006 at 11:22 AM
what do I do with the negative from the control box?



Posted By: beatynator1
Date Posted: February 12, 2006 at 11:41 AM

when you say "ground" does that mean hook it up to the negative end of the battery?




Posted By: beatynator1
Date Posted: February 15, 2006 at 4:48 PM
I want to wire a switch to my neons but the wires coming out are the same color and wether its ground or positive it doesnt say. Whats the best method for testing those wires to see which one is positive?


Print Page | Close Window