Hi all, I'm new here and completely new to wiring anything into my car!
I've recently purchased a set of footwell neons and have no clue has to how to wire them!
Firstly the interior ones, I know how to get behind my cigerette lighter and would like to know how I tap into the power supply and connect them up. At the moment the Lights are connected up to a connector which plugs straight into cigarette lighter hole.
Which wire is +ve and which is -ve? How would I install a switch?
Is there a tutorial website that I could use?
Thanks!
The center wire of the cigarette lighter is (+) and the outside is (-). On the neon lights find which wire is connected tot he center pin (+) and mark this conenction as (+). The other will be (-) and conncet to the cigarette lighter wires. Run a switch between the ground wire.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
i hooked mint up to a switch through a piece of plastic in the dash.
power wire to switch
ground wire to switch
wire to accessory power in
wire from accessory to ground
good luck
-------------
you can never have too much of a good thing
My neons came with a controller box and the positive power wire for the unit is tapped into my lighter from behind, the negative is jut grounded on the chassis. As for the box, I turned it to "On" and tucked it away somewhere behind the dash, since I don't really need to turn them off.