Print Page | Close Window

led problem

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75977
Printed Date: May 20, 2024 at 7:40 PM


Topic: led problem

Posted By: bigtars
Subject: led problem
Date Posted: April 09, 2006 at 11:04 PM

I installed a led lightbar on my 2006 honda ridgeline that plugs into the trailer connector. everything works great except when the turn signals are flashing with the brakes on the turns are not in sync with the flashing light bar. all of the lights on the truck are led with the correct resisters installed. any ideas to change this will help me a lot. i can live with it.just annoys me.

-------------
bigtars



Replies:

Posted By: crcustoms45
Date Posted: May 29, 2006 at 4:54 PM

hard wire it.  cut off trailer pin from led bar (not car side) and put the wires at tail lights.  ask the company that made the bar for details on specific wires. 

it may be more work than its worth, but you will recover your trailer pin for a trailer. 



-------------
Chris
CRCustoms



Posted By: ff-mike
Date Posted: June 01, 2006 at 5:31 PM
Are they out of synch or are they 180* off (directional on,LED off and vicer versa)? If so, this may be caused by the converter from the OEM lights to the trailer. Most vehicles these days use seperate brake & directionals, and the convertor combines these using XOR technology.




Print Page | Close Window