Street Glow Hott Wirez Accent Light
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80506
Printed Date: October 31, 2025 at 7:54 AM
Topic: Street Glow Hott Wirez Accent Light
Posted By: c_cook2007
Subject: Street Glow Hott Wirez Accent Light
Date Posted: July 19, 2006 at 7:54 PM
I had purchased a 10 foot Street Glow Hott Wirez Accent Light. I had installed it according to the direction and to a switch. I have the light and the switch installed according to their directions but whenever I go to turn the switch off it blows the 20A fuse for the cigar lighter. I have the light hooked up to the switch and the switched hook up to the cigar lighter. Along with the light is a 100W transformer. I was wondering why I keep blowing a fuse when I go to turn off the light. I can have it on and the fuse won't blow but when I go to turn it off, it blows. So I was messing about with it to try and figure it outr whe the light disconnected frmo the power wire. It's a black wire and a black wire with a wire stripe. I was wondering how I would reconnect those two wires to the light to make it work again along with why I keep blowing fuses when I go to turn off the light. Could someone please explain to me why the fuse keeps blowing and how to reconnect the light to the power wires?
Replies:
Posted By: lukes
Date Posted: July 19, 2006 at 8:10 PM
To start with your switch was probably bad in the first place. As for the wires I don't know with out looking at it.
|