Hello still stuck with headlight problems.First thing I recently put in audiovox AA-925 when headlights stopped working. Didnt mess with anything in headlight circuits only put in keyless entry. Ok what I have is r/w coming from battery to relay to combo switch. I also have a r/blue from combo switch to back of fuse box. Both are 18guage wire. Back to r/w from headlight relay goes to R and L headlight fuse then R/W and R/Blue go to right and left of headlight. Now back to switch In switch I have R/blue=13 headlights R/W=8 flashers R/Y=7 highs R/G=17 lows W/Black16=ground negitive 14=tails 13=headlights. Ok the only thing that works is headlight flashers and tailights and only time I can here relays click. I hope i gave enough info thanks
-------------
the blazer man
Sorrry about being so confusing other night had a little to much to drink lol. Ok I installed keyless entry for door locks and thats it. So only thing I touched was flashers. Wierd thing is everything was working fine for about ten mineuts then went to park it nd went inside for about 2 hours came back out and headlights stopped working only high beam flash and still the only thing that works on combination sw. Looking at a wiring diagram and everything looks rights. Ill start with headlight relay.I have 18guage R-W going to back of fuse block then coming out to combo switch. Then I have another 18guage R-L from comb switch to back if fuse block and looks like connecting to R-W. Then I have B-Y going to both headlight fuses LH RH 10 amp. Then R-L going to one of headlight from fuse and R-W going to other headlight from fuse. Now back to switch I have R-Y going to front of fuse block then coming out to J/C connect and Then coming out to LH and RH headlights. Back to comb switch last wire is R-G and is going to back of fuse block and connecting with LG and LG goes to high beam indicator and continues in W/B to ground. Then R-G from back of fuse block continues to J/C then goes to both headlights.Then W/B from ground goes to comb sw. Now like I said only lights working from that comb sw is taillights and flash and didnt touch anywires just mentioned so thinking switch went out or maybe disconnected ground somewhere by accident. and headlight relay only clicks when flashers come on. Anybody know what might be problem tested headlight relay its good tested headlights 1 and 2 fligments good. thank u
-------------
the blazer man