Assembling check lamp canceller

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83467
Printed Date: May 01, 2024 at 5:14 PM

Topic: Assembling check lamp canceller

Posted By: jose pereira
Subject: Assembling check lamp canceller
Date Posted: September 28, 2006 at 5:51 PM

Fellows,

I am new here, and would like to receive from someone, the instructions to attach a check lamp canceller in the circuit of HID Xenon headlight.

I Know that need a resistor . The question is how many ohm and watt do I need?

The fromer bulb was 12V 55W.

The resistance of the lamp is 0.9 Ohm, mesured between poles of the lamp

I need in reality, emulate the lamp in the circuit to turn off the check lamp which appear a simbol on the instrument like a burnt lamp.

Thanks

Jose

Replies:

Posted By: josh1979
Date Posted: September 28, 2006 at 6:56 PM

i just took the bulb out of my cluster very easy and quick

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english

Posted By: jose pereira
Date Posted: September 28, 2006 at 10:05 PM

josh1979 wrote:

i just took the bulb out of my cluster very easy and quick

Thank you by your answer, but looks like that you did not understand the question!

The bulb is removed!!! For this reason come up the symbol of burnt lamp at LCD screen.

I am runing the HID Xenon right now

Thanks

Posted By: josh1979
Date Posted: September 28, 2006 at 10:49 PM

i sry when i installed the hids in one of my cars my indacator for burnt head light came on that what i thought happend to you i did not catch that you had another indcator. now to your real problem i would try a 0.9 resistor in place of the bulb a standard one from radio shack should do the trick. but i have never tried to replace a bulb with a resistor before one last thing if posable relocate the bulb so it is still hooked up but you cant see it. but i see no harm comeing from the resistor

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english

Print Page | Close Window