Trailer wiring with leds

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83674
Printed Date: May 13, 2025 at 5:23 AM

Topic: Trailer wiring with leds

Posted By: theluxfactor
Subject: Trailer wiring with leds
Date Posted: October 04, 2006 at 7:45 AM

I've replaced two tail/stop/turn incadscent lights with 2 tail/stop/turn leds on my trailer and the problem I'm having is they only work when the pinal hook and ring are contacted. There is a ground throu the 6 way connector and its good as it runs the clearance lights. I can have one incadscent and one led hooked up and everything works fine. Any help would be great

Thanks

Replies:

Posted By: MikesMarine
Date Posted: October 16, 2006 at 8:21 PM

im gonna guess one of the lights ground isnt connected to the wire right, and is contacting the trailer frame. this completing the circuit when hooked up, but not when you just have the wires connecting

Print Page | Close Window